Plates Brand New

Scorpion Pair Level III AR500 Steel Body Armor Two 10 x 12 Plates + Trauma Pads

Scorpion Pair Level III AR500 Steel Body Armor Two 10 x 12 Plates + Trauma Pads
Scorpion Pair Level III AR500 Steel Body Armor Two 10 x 12 Plates + Trauma Pads
Scorpion Pair Level III AR500 Steel Body Armor Two 10 x 12 Plates + Trauma Pads
Scorpion Pair Level III AR500 Steel Body Armor Two 10 x 12 Plates + Trauma Pads
Scorpion Pair Level III AR500 Steel Body Armor Two 10 x 12 Plates + Trauma Pads
Scorpion Pair Level III AR500 Steel Body Armor Two 10 x 12 Plates + Trauma Pads

Scorpion Pair Level III AR500 Steel Body Armor Two 10 x 12 Plates + Trauma Pads

Tactical Scorpion Gear AR500 steel plate body armor Plus 10mm Trauma Pads. A stand alone armor plate with multiple hit capability.

Fully encapsulated to protect against corrosion, chemicals and sweat. Full Spall build-up coating at additional cost. Fully tested by independent Lab (documentation sent by request).

Rated for up to six hits from 7.62 Nato bullets. 308 Winchester with velocities up to 2780 fps. For front and/or back protection.

Plate Size: 10" x 12" - Two curved plates. 10mm Trauma pads: Proudly manufactured in USA by our in-house CNC machinery from the same CAD drawings utilized to produce our body armor plates therefore guaranteeing a perfect match. These will of course also work for any competitors similar sized body armor plates. Made from non- ballistic property 10mm custom made foam material which will reduce the compression from the armor plate in case of a projectile strike.

Super lightweight at only 6 ounces for a complete 4 pc set. · Reduces compression from projectile strike · Lightweight at only 6 ounces for complete 4 piece set · Inexpensive · Also great for stand-alone paintball protection · Soft and flexible. There are many online videos documenting the strength and reliability of our armor plates as our plates can take far more punishment than they are rated for and when your well-being is at risk, you should not take chances with lesser quality body armor. We utilize a CNC laser cutting table for the cutting of all our AR500 products. There is no equal method. Lasma cutting cuts slowly, this puts a lot of heat into the steel. (Submerged plasma cutting machine is no better) This excess heat can result in excessive chipping and damage near the cut edge during use and easily shattering when shot. Plasma cutting generates large amounts of heat that is deposited into the steel, softening its edges.

Plasma cutting is the largest out of the most commonly used methods for cutting abrasion resistant steel. Most AR500 is cut with plasma cutters as they are cheap and relatively small compared to laser cutting. Our Curved plate is bent on a laser cut custom die set with single radius bend which provides a perfect radius on each and every plate we produce, not bent multiple times on a press brake which provides uncontrollable results.

Here at Tactical Scorpion Gear we manufacture our own vest carriers, level IIIA vests and all our products. Weights : All weights are in pounds. 6x6: 3 6x8: 3.4 10x12: 8 11x14: 10.3. 6 x6 : 3.4 6x8: 3.8 10x12: 8.4 11x14: 10.7.

Will withstand multiple hits from all pistol calibers. Base coated with Super strong hybrid polyurea for the protection of the steel. Tested by HP White laboratory.

This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor. NIJ tested Level III Armor will defeat 6 rifles round shots up to 7.62x51/.

Purchaser is encouraged to seek qualified legal counsel in his/her jurisdiction if Purchaser has any questions concerning ab federal, state, or local laws. 9 Although Sellers body armor is tested to withstand bullets, the armor is bullet resistant and not bulletproof. Body armor will not protect someone from injury or death in all circumstances.

Body armor will not provide any protection for the parts not covered by the armor. Purchaser acknowledges that there is always a risk of injury, including serious injury or death, if struck by a bullet while wearing body armor. ALL WARRANTIES, INCLUDING THE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE HEREBY EXCLUDED.

These Terms and Conditions may be updated, revised, or changed without prior notice. We stand behind everything we sell. Guarantee doesnt cover ordinary wear and tear or damage caused by improper use or accidents. The item "Scorpion Pair Level III AR500 Steel Body Armor Two 10 x 12 Plates + Trauma Pads" is in sale since Friday, August 28, 2020. This item is in the category "Sporting Goods\Hunting\Tactical & Duty Gear\Body Armor & Plates".

The seller is "tacticalscorpiongear" and is located in Goldsboro, North Carolina. This item can be shipped to United States.

  • Brand: Tactical Scorpion Gear
  • Type: Plates
  • Protection Against: Ballistic
  • Threat Level Rating: III
  • MPN: TSG1012BR+TP
  • Custom Bundle: No
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Armor type: Level III
  • Color: Black
  • Model: AR500 Body Armor Plates
  • Non-Domestic Product: No
  • Size: 10 x 12
  • Style: Body Armor Plates
  • Trauma Pad: 10mm EVA Foam

Scorpion Pair Level III AR500 Steel Body Armor Two 10 x 12 Plates + Trauma Pads