Combo (Symmetrical and Asymmetrical) Arm Assembly with Screw-in Pads! CE Certified Lift Structure and Hydraulic System. 6'9 Lift Height Maximum with Truck Adapters. Durable Powder Coated Finish on Steel. Upgraded Floor Plate, Beveled Diamond Plate Steel 5/32 with Supporting Bracket.
Double Seal Rings Protecting PU Material. Carriage Material Q355, Stronger Than Normal Q235 Steel. No additional charge when picking up from terminals.
Sorry we do not provide liftgate service, as car lift package is too long to use liftgate. APlusLift HW-10KBP car lift (auto hoist) is one of the most affordable floor plate car lift with 10,000 LB Heavy Duty and Strong Double "S" Column Design. Our auto lifts are upgraded to use thicker steel for stronger support (Column Steel upgraded to 13/64" from 11/64"; Carriage and Arm Steel upgraded to 15/64" from 3/16"; Carriage yoke upgraded to 5/16" from 15/64").APlusLift HW-10KBP car lifts are built with quality materials and good workmanship. We do not use recycled materials to save cost for parts such as cylinder seal rings. Suggestions to improve our products and service are always welcome! Base Plate Steel Thickness: 5/8. Driving Mode: Dual hydraulic cylinders, chain drive.
Lifting Capacity: 10,000 LB. Combo (Symmetrical and Asymmetrical) Arm Assembly. Straight Front/Rear 3 Stage reach from 22 7/8" to 42 5/8". Straight Rear 2 Stage reach from 33 5/8" to 52 7/8".
Screw-in pads 4 pieces included. Truck adapters 4 pieces included.
Double point safety lock release. Relief valve built in power pump to prevent overloading. Up-limit switch to protect cylinders working stroke used in safe length scope. Heavy duty 3/8" diameter cable and 5" pulley that reduce high stress on synchronization process and increase cable life. Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down.
Lifting operation by pressing "UP" button on motor. Manual lowering operation by pressing lever.
Maximum Lift height with Truck Adaptor: 81. Maximum Lift height without Truck Adaptor: 75. Minimum Height of Arm Top: 4.Carriage to Carriage Width (Drive through clearance): 100. Column to Column Width: 109. Column Cross Section: 11"L x 7"W.
Floor Plate Size: 10 5/8"W x 1 7/8"H. Time to full rise: 50 sec. Motor: 220V Single Phase 3HP (need a 30A breaker).
Hydraulic Oil: 3-5 gallons AW32/AW46. Tool trays and toe guards included.Concrete Requirement: 6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below). It usually takes about one week to mid-west and about one and half week to east coast. We will do our best to resolve your problem quickly.
Please let us know if you have any problem with parts. The item "APlusLift HW-10KBP 10000LB 2-Post Heavy Duty Floor Plate Car Lift Truck Hoist" is in sale since Monday, March 5, 2018. This item is in the category "eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Auto Lifts & Frame Machines".The seller is "apluslift" and is located in Multiple Locations. This item can be shipped to United States.